Advance Turbo Flasher Updates

Advance Turbo Flasher 5.55 (14.07.2010)

• Added new FBUS Loaders
• Enabled BB5 read ASK
• 3 times prolonged Pooling Phone timeout
• Enabled server access through IP addresses (instead of domain names)
• Skipped Simlock Server Version reading

*This Update is optional, it is intended to ensure support of the latest available Flash Loaders. It is strongly recommended to apply "Restore Box" for the latest version of the compiled LogiCore 7.07.10 Firmware to be fully functional.

Advance Turbo Flasher Features

• Flash
  • Supports new loaders for SL3 phones:
    • New RAPUYAMA loaders with new protocol (2010 loaders)
    • Dead USB flashing (for new loader models also)
  • Super fast Nokia flashing
    • Nokia E52 full flash via Fbus (49 sec)
    • Nokia X3 full flash (29 sec)
    • Nokia 6500c full flash via Fbus (28 sec)
    • Nokia 6700c (48 sec)/Nokia 6120c (52 sec) full flash
• Repair
  • SL1, SL2, SL3 Super dongle key repair
  • SL1, SL2 SIMlock data repair
• Unlock
  • SL1, SL2 SIM lock remove via codes
  • New Rapido SL3 SIMlock remove. The following versions are supported:
    • 5800d (RM-356) - v31.0.008 - v30.0.011 - v31.0.101
    • 6790s - 1c (RM-492)
    • 6790s - 1b(RM-599)
    • E63 (RM-437) - v400.21.013
    • E71 (RM-346) - v400.21.013
    • N96 (RM-247) - v30.033 - v30.101
  • Simlock RPL unlock/relock

Advance Turbo Flasher Software Features

• High speed turbo flash
• New protocol devices X3, X6, E52, E55, 6700 etc. and all Rapuyama Fbus flash
• Tuning and Maintenance
  • Life Timer Tuning (reset/write life time)
  • Factory Reset
  • Warranty Edit
  • Production Data Edit
  • Read/write camera configuration
• IMEI and locks
  • Safe unlock by means of code calculation (Supports SL1 SL2 and some SL3 models)
  • Unlock / Relock using RPL method
  • Super Dongle key repair
• PM (Permanent Memory)
  • Read/write permanent memory using SX4 Server
• Phone Test (self-test)

Advance Turbo Flasher Hardware Features

• 480 mbps USB 2.0 Connection
• 100% FPGA based implementation of the Flash BUS protocols
• Adjustable VCCIO Logic Levels (3.30v, 2.80v and 1.80v)
  • Compatible with old phone model Logic Level (3.30v)
  • Compatible with new phone model Logic Level (2.80v)
  • Compatible with future phone model Logic Level (1.80v)
• Proper ESD protection on the FLASHBUS port
  • Protects phone damage due to Electro Static Discharge
• Ultra Fast Flash Clock currently up to 15 MHz
  • Firmware updatable to support up to 60 MHz without hardware modifications
• Internal VPP Flash Voltage Generator (3.0v, 5.0v, 9.0v and 12.0v)
  • Makes faster Flash Erasing on slow phones
  • Does not require external power adapters to generate 9.0v and 12.0v
  • Uses a Fast Switching SEPIC design
• Hardware upgradable through internal expansion slots
• MicroSD Card slot for future developments
• Dual RJ-4x Ports (RJ-45 and RJ-48) for external communication
  • The RJ45 port is the main "Turbo" Bus
  • The RJ48 port is the Secondary Bus that can support parallel or serial protocols such as 2Mbps UART, JTAG and Flashing Protocols
• 5 Multicolored LED Indicators:
  • Rectangular Orange: FBUS_RX
  • Rectangular Green: FBUS_TX
  • Circular Blue: USB_POWER / ACP-X_POWER
  • Circular Green: VBATT
  • Circular Orange: VPP